01
Fascia depth
Measure the required board depth at each elevation and box-end detail.
Roofline & Rainwater
Inside Roofline & Rainwater
Search the department, or use the guided route below.
Forti Nova roof edge systems
The roof edge is one connected detail.
Fascia, capping, soffit, ventilation, corners, joints and rainwater goods should be selected around the existing structure and measured as one order.
Trade & public Blackburn collection Compatible components checked
Current online range
119 roofline products
Start with the board role
What does this part of the roof edge need to do?
Replacement, capping and soffit are different decisions. Keeping them separate makes the range easier to navigate.
Measure separately
Three measurements prevent most ordering mistakes.
Do not use one rough perimeter figure for every component. Fascia depth, soffit width and straight-run lengths answer different questions.
Check the measurements02
Soffit width
Measure the underside separately and confirm the ventilation route.
03
Straight runs
Record every run, corner, joint, return and change in direction.
Replacement vs capping
Do not cover a support problem with a finishing board.
A capping or reveal board may be appropriate only where the retained substrate and support are sound. Full-replacement fascia follows a different route.
Compare the two routesVentilation is a design check
A vented board is not the whole ventilation strategy.
The responsible contractor or designer confirms the required airflow, the continuous path and whether a vented soffit is the correct route.
Review the ventilation decisionFinish selection
White, black and selected finishes - matched across the order.
The current records show white, black and selected-finish routes. Exact colour availability and matching corners or trims are confirmed before order.