New flat roofs on extensions, garages and garden rooms
EPDM installation route
EPDM roof installation—without starting again from a generic form.
You have already chosen EPDM. This page stays with that decision, explains the installation route and opens an enquiry pre-set for EPDM installation.
System already selected Irrelevant wizard steps removed Project-specific review
Local EPDM installation routes
EPDM roofing support across every target North West town.
Each dedicated town page combines FlexiProof supply, technical guidance, training access and a suitable installation enquiry route. Use the relevant town page for local product and project information.
EPDM roofing BlackburnEPDM roofing PrestonEPDM roofing ManchesterEPDM roofing BoltonEPDM roofing BurnleyEPDM roofing AccringtonEPDM roofing ChorleyEPDM roofing WiganEPDM roofing WarringtonEPDM roofing LiverpoolEPDM roofing RochdaleEPDM roofing OldhamEPDM roofing StockportEPDM roofing BuryEPDM roofing SalfordEPDM roofing LancasterEPDM roofing LeighEPDM roofing Skelmersdale
When this route fits
Is EPDM roofing installation the right route?
Replacement coverings where the existing build-up has been assessed
One-piece EPDM roofs requiring membrane, adhesives, trims and outlets
Homeowner, trade and developer projects needing a supply-and-install route
Useful project information
Send the facts that change the answer.
The tailored enquiry below already knows the system and route. Add these details so the first response can focus on the real decision rather than asking you to start again.
Project postcode and preferred timing
Roof length and width, or approximate area
Photographs of the full roof and all perimeter details
Deck or existing roof build-up, where known
Walls, rooflights, pipes, outlets and other penetrations
Access, height and any occupied-area constraints
Delivery route
Five clear stages. One selected system.
Send the roof brief
Provide dimensions, photographs, postcode and what stage the project has reached.
Check the build-up
Deck condition, existing coverings, drainage and complex details are reviewed before the installation route is confirmed.
Build the EPDM scope
Membrane format, adhesives, flashing, perimeter trims, outlets and exclusions are set out together.
Confirm the contractor
A suitable approved contractor, programme and named responsibilities are confirmed in writing.
Install and hand over
Preparation, weather control, detailing, completion checks and applicable records follow the agreed scope.
What the page does not assume
Specific does not mean automatic.
The page removes irrelevant choices. It does not remove the technical, commercial or responsibility checks needed for a truthful project or course route.
A click does not guarantee a contractor or installation date; availability is confirmed per project.
Overlay, repair or replacement is not assumed until the existing roof and deck are understood.
Product warranty, contractor workmanship and project-specific exclusions must be identified separately in the quotation.
EPDM roofing questions
Straight answers before you enquire.
These answers stay on the selected system rather than returning you to a general installation or training page.
Can Forti Nova install my EPDM roof?
Forti Nova supplies and supports the FlexiProof system. Suitable installation enquiries are assessed and routed to an appropriately trained approved contractor, with the delivery party and responsibilities named in the written quotation.
What information is needed for an EPDM installation quote?
Send the postcode, dimensions, photographs, deck or existing roof information, drainage arrangement, walls, rooflights, penetrations and access details. Drawings are useful where available.
Can an existing felt or roof covering simply be overlaid?
Not automatically. The existing covering, deck, moisture condition and details must be assessed. Overboarding, strip-off, local repair or another route may be required.
Can I buy the materials and arrange my own installer?
Yes. Supply-only remains available. This page is specifically for customers who want an assessed EPDM installation route.
Do you provide EPDM installer training as well?
Yes. The separate EPDM training page covers the Blackburn training route and opens a training enquiry already set to EPDM.
Tailored installation enquiry
Start with EPDM roofing already selected.
Division, system and installation intent are pre-filled. The wizard begins with the next useful question.
EPDM Roof Installation EnquiryEPDM roofing
Focused form · usually under 2 minutes
Step 1 of 119% complete
What best describes you?
This helps us route you to the right team.
Drawings and photos help us respond faster • You can skip anything you do not know • Commercial and multi-system routes can be prioritised
01254 433987Prefer to speak first? Call the Blackburn team.